by Phillip » Mon Jul 05, 2010 5:29 pm
Welcome aboard John,
What Mark is your Top Hat?
First thing to check is whether the bronze block, to which your tiller is bolted, is secure on the rudder shaft.
There is a 'key' to this arangement and you also need to determine if it (the key) is complete or worn.
There should be a solid feel to the tiller,it should not just flop a bit before taking up.
If this is not the answer, then it may be weather helm.
Phillip
SEAKA
Phillip.
SEAKA
A 1969 Mark 1
Home port is at Dunbogan on the Camden Haven Inlet, Laurieton NSW